RASPBERRY PI

RASPBERRY PI

Here we see about "how to use the raspberry pi"
my Youtube channel link is: CLICK HERE

Raspberry pi tutorial link is: CLICK HERE

Raspberry pi GPIO tutorial link: CLICK HERE

Raspberry pi command line or terminal tutorials link:
https://www.youtube.com/watch?v=eUO9OFuPC9g&list=PLFltJPFTCkTb70YBhbFswIaFNiwxgSFo_

Comments

Post a Comment

Popular posts from this blog

programing part for petrol level measuring in tamil

Image
this is coding part for petrol measuring project.How the codes are working and how is run.All details are told in this video.This is fully tamil video.So you will learn easily.                                 code for this project #define trig 5 #define echo 6 #include <LiquidCrystal.h> LiquidCrystal LCD(8,9,10,11,12,13); //(en ,rs,d0,d1,d2,d3) void setup() {   Serial.begin(9600);   LCD.begin(16,2);   pinMode(trig,OUTPUT);   pinMode(echo,INPUT);   pinMode(13,OUTPUT);   pinMode(4,OUTPUT);   digitalWrite(4,HIGH); } void loop() {   digitalWrite(trig,LOW);   delay(2);   digitalWrite(trig,HIGH);   delay(2);   digitalWrite(trig,LOW);      long t= pulseIn(echo,HIGH);   float cm=t/29/2;   LCD.setCursor(0,0);   LCD.print("petrollevel:");   LCD.setCursor(12...
Read more

using millis() in ultrasonic sensor program in tamil

Image
Coding #define trig 5 #define echo 4 void setup() {   Serial.begin(9600);   pinMode(trig,OUTPUT);   pinMode(echo,INPUT);   pinMode(13,OUTPUT);   pinMode(12,OUTPUT);   digitalWrite(12,HIGH);   delay(2000); } void loop() {   digitalWrite(13,HIGH);   digitalWrite(12,LOW);   delay(1000);   digitalWrite(13,LOW);   digitalWrite(12,HIGH);   delay(2000);     long duration , distance;     digitalWrite(trig,LOW);   delay(2);   digitalWrite(trig,HIGH);   delay(2);   digitalWrite(trig,LOW);     duration= pulseIn(echo,HIGH);   distance=(duration/2)/29.1;   Serial.println(distance); }
Read more

how to make pic and pot robot (robotic arm) in tamil

Image
Coding For Pic and Pot #include <Servo.h> String servo; String val; int value; Servo bottomservo; Servo handservo1; Servo handservo2; Servo clipservo; void setup() {   Serial.begin(9600);   bottomservo.attach(6);    handservo1.attach(9);    handservo2.attach(10);    clipservo.attach(11);     } void loop() {   if (Serial.available())   {     servo  = Serial.readStringUntil(',');     Serial.read();      val  = Serial.readStringUntil('\0');     value = val.toInt();     Serial.println(servo);   }   if(servo == "1")   bottomservo.write(value);    else if(servo == "2")   handservo1.write(value);   else if(servo == "3")   handservo2.write(value);   else if(servo == "4")   clipservo.write(value); } *****************************************************************************
Read more