arduino controlled motor and servo in tamil

-


if you want my app dowload here:

https://docs.google.com/uc?export=download&id=1hZIQLwD-Ou2L5EhuSKH4Tmn6ECjB-kJ_


codings

#include <SoftwareSerial.h> 
#include <Servo.h>

Servo servo; 
int bluetoothTx = 10; // bluetooth tx to 10 pin
int bluetoothRx = 11; // bluetooth rx to 11 pin

SoftwareSerial bluetooth(bluetoothTx, bluetoothRx);
int motorpas = 5; //connect passitive pin of motor in 5
int motorneg = 6; //connect negative pin of motor in 6
int servoPin = 9; //connect servo signal pin in 9
int level = 0;
void setup() {
 Serial.begin(9600);
 bluetooth.begin(9600);
 pinMode(motorpas,OUTPUT);
 pinMode(motorneg,OUTPUT);
 servo.attach(servoPin);
}


void loop() {
  if(bluetooth.available()>0)
  {
    unsigned int cmt;
    cmt = bluetooth.read();
    Serial.write(cmt);
    Serial.println();
    if(cmt == 'a')
    {
      servo.write(0);
    }
    else if(cmt == 'b')
    {
      servo.write(45);
    }
    else if(cmt == 'c')
    {
      servo.write(90);
    }
    else if(cmt == 'd')
    {
      servo.write(135);
    }
    else if(cmt == 'e')
    {
      servo.write(180);
    }
    else if(cmt == 'f')
    {
      digitalWrite(motorpas,HIGH);
      digitalWrite(motorneg,LOW);
      Serial.println("FORWORD");
    }
    else if(cmt == 'r')
    {
      digitalWrite(motorpas,LOW);
      digitalWrite(motorneg,HIGH);
      Serial.println("REVERSE");
    }    
    else if(cmt == 'l')
    {
      level = level - 20;
      analogWrite(motorpas,level);
      digitalWrite(motorneg,LOW);
      Serial.println(level);
    }  
    else if(cmt == 'h')
    {
      level = level + 20;
      analogWrite(motorpas,level);
      digitalWrite(motorneg,LOW);
      Serial.println(level);
    }  
     
  }
}
************------------------********************----------***************

Comments

  1. UnknownJune 24, 2019 at 7:03 AM

    bro where is your bluetooth code how we learn ???????

    ReplyDelete

Post a Comment

Popular posts from this blog

programing part for petrol level measuring in tamil

-
Image
this is coding part for petrol measuring project.How the codes are working and how is run.All details are told in this video.This is fully tamil video.So you will learn easily.                                 code for this project #define trig 5 #define echo 6 #include <LiquidCrystal.h> LiquidCrystal LCD(8,9,10,11,12,13); //(en ,rs,d0,d1,d2,d3) void setup() {   Serial.begin(9600);   LCD.begin(16,2);   pinMode(trig,OUTPUT);   pinMode(echo,INPUT);   pinMode(13,OUTPUT);   pinMode(4,OUTPUT);   digitalWrite(4,HIGH); } void loop() {   digitalWrite(trig,LOW);   delay(2);   digitalWrite(trig,HIGH);   delay(2);   digitalWrite(trig,LOW);      long t= pulseIn(echo,HIGH);   float cm=t/29/2;   LCD.setCursor(0,0);   LCD.print("petrollevel:");   LCD.setCursor(12...
Read more

using millis() in ultrasonic sensor program in tamil

-
Image
Coding #define trig 5 #define echo 4 void setup() {   Serial.begin(9600);   pinMode(trig,OUTPUT);   pinMode(echo,INPUT);   pinMode(13,OUTPUT);   pinMode(12,OUTPUT);   digitalWrite(12,HIGH);   delay(2000); } void loop() {   digitalWrite(13,HIGH);   digitalWrite(12,LOW);   delay(1000);   digitalWrite(13,LOW);   digitalWrite(12,HIGH);   delay(2000);     long duration , distance;     digitalWrite(trig,LOW);   delay(2);   digitalWrite(trig,HIGH);   delay(2);   digitalWrite(trig,LOW);     duration= pulseIn(echo,HIGH);   distance=(duration/2)/29.1;   Serial.println(distance); }
Read more

how to make pic and pot robot (robotic arm) in tamil

-
Image
Coding For Pic and Pot #include <Servo.h> String servo; String val; int value; Servo bottomservo; Servo handservo1; Servo handservo2; Servo clipservo; void setup() {   Serial.begin(9600);   bottomservo.attach(6);    handservo1.attach(9);    handservo2.attach(10);    clipservo.attach(11);     } void loop() {   if (Serial.available())   {     servo  = Serial.readStringUntil(',');     Serial.read();      val  = Serial.readStringUntil('\0');     value = val.toInt();     Serial.println(servo);   }   if(servo == "1")   bottomservo.write(value);    else if(servo == "2")   handservo1.write(value);   else if(servo == "3")   handservo2.write(value);   else if(servo == "4")   clipservo.write(value); } *****************************************************************************
Read more